Estimated Read Time: 12 minutes
If you are researching the cost to rewire a house, you want clear numbers and no surprises. This 2025 guide breaks down every factor that drives price in Lafayette and nearby Acadiana cities, and shows how to plan a safe, code-compliant project without overspending. You will see typical price ranges, what permits involve, when panels must be upgraded, and smart ways to phase work if needed. When you are ready, we provide a transparent, line-by-line quote.
What Drives the Cost to Rewire a House in 2025
House rewiring is more than pulling new cable. Your total price is shaped by home size, access, code updates, and finish standards. In 2025, material and labor markets in Acadiana remain steady, but specialized tasks still add cost.
Key factors you should consider:
- Square footage and circuit count
- More rooms and dedicated circuits mean more wire, boxes, and breakers.
- Access and construction type
- Attic and crawlspace access, wall material, and ceiling height affect labor hours. Plaster, brick, and tight eaves take longer.
- Panel capacity and condition
- Older or undersized panels often need an upgrade when adding modern loads.
- Code upgrades
- GFCI and AFCI protection, tamper-resistant receptacles, and grounded outlets are required in many areas.
- Fixtures and finish level
- Replacing devices only is cheaper than adding new lighting layouts, dimmers, or specialty controls.
- Permits and inspections
- Required by Lafayette Consolidated Government and surrounding parishes for whole-home rewires.
"I had four electrical issues in my older home... They changed every device throughout my home to update the wiring... made sure my every request was handled with professionalism and grace. This company is top-notch!"
2025 Price Ranges in Lafayette and Nearby Cities
Every home is unique, but most Lafayette-area whole-home rewires fall into these ranges:
- Small home or condo up to 1,200 sq. ft.: typically $8,500 to $14,000
- Mid-size 1,300 to 2,000 sq. ft.: typically $12,000 to $22,000
- Larger 2,100 to 3,000 sq. ft.: typically $18,000 to $32,000
- Historic or complex layouts: add 10% to 30% for plaster, limited access, or detailed restoration
- Knob-and-tube or aluminum remediation: add $2,000 to $8,000 depending on extent
What is usually included in these ranges:
- New branch-circuit wiring and device replacements
- New grounded receptacles, switches, and GFCI where required
- Arc-fault protection in sleeping areas and other code-required spaces
- Bonding, grounding, and labeling
- Permit, rough-in inspection, and final inspection
"Great guys! On time, professional and went above and beyond! It may cost a little more, but you definitely get what you pay for. Honestly I'd rather have peace of mind and these guys definitely deliver that."
Labor, Materials, Permits, and Inspections Explained
Understanding the components of your estimate helps you compare apples to apples.
Labor
- Licensed electrician lead plus crew members priced by hour or bundled per scope.
- Extra time for patch-friendly techniques that preserve finishes.
Materials
- Copper NM-B cable, EMT or flexible conduit where required, boxes, connectors, tamper-resistant devices, GFCI/AFCI breakers, and labeling.
- High-quality, listed components reduce nuisance trips and extend life.
Permits and Inspections
- Whole-home rewires require permits and staged inspections. Our team handles the paperwork and coordinates with inspectors so the job stays compliant and on schedule.
- Louisiana jurisdictions follow the National Electrical Code as adopted by the state and local authorities.
Testing and Documentation
- Continuity and polarity checks, GFCI/AFCI function tests, panel torque and labeling, and homeowner walkthroughs.
Hard facts that matter for safety and compliance:
- Federal Pacific Electric Stab-Lok panels have widely documented safety concerns. Many insurers urge or require replacement during major electrical upgrades.
- Routine electrical inspections are recommended every 5 to 10 years, and more often for older homes or if you notice recurring issues.
Panel Upgrades, Dedicated Circuits, and Code Updates That Impact Price
A rewire is the best time to correct capacity issues and meet modern code.
Panel and Service Upgrades
- Moving from a crowded 100-amp panel to a modern 200-amp panel with space for future circuits often adds $2,000 to $4,500, depending on service conditions and utility coordination.
- Relocating a panel or correcting improper clearances can increase labor.
Dedicated Circuits
- Kitchens, laundry, microwaves, disposals, and EV-ready outlets often require dedicated circuits. Expect $250 to $650 per new circuit depending on run length and access.
Protection and Devices
- GFCI protection is required in kitchens, bathrooms, garages, outdoors, and other wet locations.
- AFCI protection is required in many living areas to reduce fire risk.
- Surge protection at the service helps protect appliances and electronics from grid or lightning events.
Lighting and Controls
- LED upgrades, dimmers, and smart switches add comfort and efficiency. Costs vary by fixture count and control type.
"Chris and Thomas did a great job replacing our electrical panel."
Timeline: What to Expect Room by Room
We map each phase to minimize disruption and keep your home functional.
Typical Sequence
- Planning and permit submission
- Rough-in rewiring by zone or floor
- Panel work and dedicated circuits
- Inspection and corrections if needed
- Device and fixture trim-out
- Final inspection and homeowner walkthrough
How long it takes
- A typical room might take one day. A whole-house setup can take several days, depending on size and access.
- In Acadiana summers, attic work often starts early to beat the heat and avoid delays.
What we protect
- Floor and furniture coverings
- Dust control and cleanup each day
- Clear labeling so you know which circuits are live
"This company came to my house on time. They found a fire hazard... changed my old Federal Pacific panel and got everything inspected all in 1 day. Very fast and hard working... I highly recommend!"
How to Control Your Rewiring Budget Without Cutting Corners
You can keep costs in check and still get a safe, long-lasting system.
Smart ways to save
- Prioritize safety first
- Fund panel, grounding, GFCI/AFCI, and damaged wiring before luxury lighting.
- Phase the project
- Tackle critical zones like kitchen, laundry, and sleeping areas first. Add nonessential circuits later.
- Simplify device selections
- Standard decorator switches and receptacles are cost-effective and still look clean.
- Improve access
- Clear attic and closet spaces. Small prep steps reduce labor time.
- Bundle upgrades
- Adding a few dedicated circuits during a rewire is cheaper than returning later.
Watch-outs that increase price
- Unpermitted prior work hidden in walls
- Water damage, termite damage, or crumbling plaster
- Panel relocation driven by clearance violations
Signs You Should Budget for a Rewire Now
Do not wait for a major failure. Look for these red flags:
- Two-prong or ungrounded outlets throughout
- Repeated breaker trips or flickering when big appliances start
- Warm or discolored receptacles and switches
- Aluminum branch wiring or visible knob-and-tube
- Frequent use of power strips because rooms lack outlets
- Federal Pacific or Zinsco panels
"I'll be calling them again to rewire my shop... Thanks for the service! See you soon!"
Financing, Insurance, and Resale Value Considerations
Money matters, and a rewire can actually protect your wallet long term.
Financing
- We offer transparent pricing and financing options, including promotional 0% plans for qualified customers. Many homeowners prefer fixed monthly payments over a single outlay.
Insurance
- Some insurers discount policies after documented panel upgrades or the removal of high-risk wiring. Always ask your carrier.
Resale value and inspections
- Clean inspection reports, grounded outlets, and modern protection add buyer confidence and reduce concessions at closing.
Paper trail
- You receive permit documents, inspection sign-offs, and a labeled panel directory. Keep these for future service and resale.
Choosing the Right Electrician in Lafayette
Price matters, but qualifications and process protect your home and budget.
What to ask before you hire
- Licensing and insurance
- Request Louisiana license and proof of insurance.
- Permits and inspections
- Confirm the contractor files permits and meets local inspection steps.
- Detailed scope and materials
- Look for a circuit-by-circuit plan, device counts, and panel specifications.
- Crew credentials
- Ask who will be on site and how the lead supervises quality.
- Warranty and follow-up
- A workmanship guarantee and clear service policy prevent finger-pointing.
Why homeowners in Lafayette, Youngsville, and Broussard choose us
- Family-owned with more than 25 years serving Acadiana
- Licensed, bonded, and insured; background-checked technicians
- We handle permits, coordinate inspections, and provide a 100% satisfaction guarantee
- We walk you through your new panel and system so you know exactly how it works
Frequently Asked Questions
How much does it cost to rewire a 1,500 sq. ft. house in 2025?
Most Lafayette-area homes around 1,500 sq. ft. fall between $12,000 and $19,000. The final price depends on access, panel capacity, code updates, and fixture choices.
Do I have to upgrade my electrical panel during a rewire?
Not always. If your panel is safe, modern, and has capacity, it may stay. Many older or crowded panels need replacement to handle new circuits and protection devices.
How long does a whole-home rewire take?
Most projects take several days. A typical room can take about a day, with inspections scheduled between rough-in and final trim-out to keep you compliant.
Will walls be opened during the rewire?
Usually yes, but we minimize openings. We use strategic access points and patch-friendly methods. Plaster, brick, or tight spaces may require more careful cuts.
Do you handle permits and inspections in Lafayette?
Yes. We file the permit, coordinate inspections, and make any required corrections so your rewire passes and is fully documented.
In Summary
Rewiring restores safety, capacity, and value. In 2025, the cost to rewire a house in Lafayette typically ranges from $8,500 to $32,000, shaped by size, access, panel needs, and code updates. Our licensed team manages permits, inspections, and a clean, labeled finish you can trust.
Ready to Get a Transparent Quote?
Call Travis' Electrical Services of Lafayette at (337) 214-0010 or visit https://www.traviselectricalservices.com/ to schedule an in-home assessment. We will map circuits, explain options, and give you a clear, line-by-line estimate you can approve with confidence.
Call, Schedule, or Chat Today
- Phone: (337) 214-0010
- Web: https://www.traviselectricalservices.com/
- Service Area: Lafayette, Youngsville, Broussard, Carencro, Scott, Breaux Bridge, New Iberia, Saint Martinville, Abbeville, and Rayne
About Travis' Electrical Services of Lafayette
For more than 25 years, our family-owned team has rewired homes across Lafayette, Youngsville, and the surrounding Acadiana area. We are a Louisiana state-licensed, bonded, and insured electrical contractor. Homeowners choose us for code-compliant work, background-checked technicians, transparent pricing, and our 100% satisfaction guarantee. We handle permits and inspections, use high-quality materials, and walk you through every circuit and safety device before we leave. Financing options, including 0% promotional plans for qualified customers, help make major projects easier to manage.